LTM 1450 CRANE Good morning, you have to go to the crane xml in the off mass search center, the value will be like 36000, change it to 160000, don't change anything else, the crane will have 160 tons and with the additional 10 tons weights, several up to the weight of the locomotive, for example a 180 ton locomotive put the crane with 8 10 ton weights it will give you 80 tons plus your 160 tons lift the locomotive figured it out if you have difficulty let me know and I'll send you the edited xml ok
I hear very few countries and states do use most of these Diesel locos on most of our lines for passenger duties as well as fright hauls but some of them are on hourly occasions are rarely ever seen but only on hourly passenger and freight runs and the majority of those locos doing the freight run duties are Diesel freight hauls since they are able to operate without the use of the pantographs Im just glad theres no Pantograph wires here in the present updates ore past mod update since i would imagine the giants engine and game physics would make those difficult to develop as well as the electric engine locomotive train models.
the famous GP7 in original high hood form will be included in the next update! And you will be able to drive it SHF or LHF! Only a couple of skins for it atm, but I will add more shortly. F-Units, I have a model, just haven’t brought it in game quite yet but I will!
all sounds awesome I’ll keep refreshing until the update 😂 honestly ur mods are brilliant, you’re a legend if I knew how to do it I’d be offering to help
No I dont think I will be making all of the small, insignificant changes that vary between the different roads. It was difficult to find models that I could make work for this mod in the first place, and in order for me to rework the model to correct it for every small detail that the roads do differently would be a large amount of time and in my opinion not anywhere close to worth it, as the models are not super detailed in the first place.
It took some time to figure out why the locomotives keep derailing sometimes, but not always... Depending on how heavy the train is loaded, the locomotive keeps derailing. I see how the boggie lifts up while accelerating. Its not so bad as in some previous versions but still reducing the fun. Anyway, great job and its helping a lot. I hope one day someone may make european/german trains too
Are you using the GP38s and having those issues with the bogies lifting up when accelerating? If so, I have found that issue as well, and I have been working on improving that. I havent had those issues with the 6 axle locos
this weekend for sure! Going to be adding A TON of new locos, new railcars, updated railcar loads, a new warehouse, and so much more! Hope y’all enjoy it. Look for it either tonight, or hopefully by saturday
Yeah I was really hoping to have some other modders help by creating assets like you mention, but nobody has so far! I do have a few more signal options coming for the next updat
I FINALLY figured out what my issue was with the first steam train I have been working on for a while! so it is FINALLY finished up, and will be included in the next update!
Yes you can create your own paint schemes! there are templates in the "textures" folder for most of the locomotives for you to create your own! just takes some work to add it to the mod
ALSO, I intend on including PRLX and other leaser locomotives in the near future haha
Good morning, you have to go to the crane's xml at the search center off mass, the value will be like 36000, change to 160000, don't change anything else, the crane will have 160 tons and with the weights of 10 tons of additional ones, various up to the weight of the locomotive, for example one 180 ton locomotive put the crane with 8 weights of 10 tons it will give you 80 tons plus its 160 tons lift the locomotive found out if you have difficulty let me know and I will send you the edited xml ok
The version I got was on FS.Com which also contains a lot of PC only mods. Unfortunately they don't have the latest version at least not yet however it worked there. And to be honest if this WAS on the modhub it would work there too. Not sure why I can't get it from here without issues though it's a bit weird.
Just wondering and it might have been asked already. If so i'm sorry. Is there any plans on making any HI-Rail vehicles or Maintance-Of-Way equipment in the future?
I know a member of a group that might be able to help u with such things as hi- rail a WMF group member by the name of Adam if not a few group members of that group and their patreon that have been testing the Hi Rail vehichles that might be useful in being the vehichles and models u seek mabey u might seek out WMF and the WMF patreon along with a Patreon containing the Hi Rail Mods in development and Testing and offer ur help in working with them to test their Hi Rail mods
LOL!!! I've got their HI-Rail stuff. It's crap! UNLESS you are going to just use them on straight track. Curves? Forget it. wont follow curves at all. I'll wait for a real modder (JWeezy) to make them.
I know people like Adam in Wood Medow Farms he and many have been Testing that Hi Rail Stuff in the Wood Medow Farms group Patreon since their Wood Medow Farms stuff is still under testing
u know hi rail vehichles were used for things like maintanence mind u so yea on such things like straight tracks that is possible to use on straight track but only for maintanence purposes
modified crane with weight to lift locomotives of 220 tons, precision of placing 4 weights of 10t on each side, total 80t lifts any locomotive and I no longer need to change the XML of the locomotives
Good morning, it depends on the way you install it, the trigger part must always be installed on the side of the line you are building, not on the connection to join the end, for example, always connect before having a line in front, as happens when you have a line ready Go connect this adapter and delete a line, then there's always a bug, understand?
Howdy, sorry for the delay I have been on my honeymoon. It sounds like you have the animated object extension mod that makes doors and gates open automatically? This mod will cause the issue you are describing, it is not compatible with my mods
Hola excelente actualizacion felicitaciones nuevamennte tremendo trabajo,lo unico que note que si bien la grua que va en el almacen es dificil de colocar ,no es tan complicado hacerlo (yo lo hice sin sacar el techo x que no sabia varias veces)lo que si note si lo puedes arreglar es que despues de colocarla cuando la estas utilizando salta y se sale del carril eso pasa casi que continuamente lo que implicaque pases mucho tiempo colocando la grua nuevamente en su lugar,como siempre felicitaciones y gracias
If you're looking for models to add i would check out stuff from the Trainz Railroad simulator series. I'm pretty sure some of those models could be adapted to Farm Sim. I happen to know about quite a few models that would be suitable including ones you've been looking for Trainz Forge is a good website too look on for up #4014 and #844. They also have a couple of geared locomotives like a climax and shay. And under diesels Ive seen good F units.
Thank you! I have looked at a few trainz models, and I have been unsuccessful in importing them into blender and exporting them into GE.. Have you ever ingamed any of the models
Honestly I'm just as stumped as you are i dont even know how blender works to begin with but i would assume its what everyone uses these days. If I can figure out how to get it to work do you want me to share the models
Wow that is incredible! do you work for the railroad in Portugal? Could you DM me on facebook maybe and we could discuss more?
Also, I have not been able to figure out how to make a diamond interchange work (like the one in your picture) because of the way the locomotives and rolling stock roll along and inside of the rails.. As soon as I figure it out, I will be adding a diamond interchange!
Good morning, I don't work at CP Portugal but I have knowledge there, that's why they sent me the 3D of the train, yes, do you have WhatsApp? my number 912 254 886 thank you
I reconise one of our stations at northgate has a track layout similar to that were our trains run in and out called a Junction style if im not mistaken which is a kind of Spoke style Junction which is a combination of multiple junctions ofc that image u posted there shows a combination of multiple junctions
Howdy Jimmy, sorry for the delayed response as I have been sick. Blurry textures has been an issue throughout FS22, it is not specific to just my mods. I have heard that when somebody is experiencing these issues, clearing the shader cache can correct this issue, if you search how to clear shader cache on YT it should show you how. Please let me know if that fixes the issues for ya!
← Return to mod
Comments
Log in with itch.io to leave a comment.
я ебал яндекс перевод
with the help of what fashion can you put a train with a crane
LTM 1450 CRANE Good morning, you have to go to the crane xml in the off mass search center, the value will be like 36000, change it to 160000, don't change anything else, the crane will have 160 tons and with the additional 10 tons weights, several up to the weight of the locomotive, for example a 180 ton locomotive put the crane with 8 10 ton weights it will give you 80 tons plus your 160 tons lift the locomotive figured it out if you have difficulty let me know and I'll send you the edited xml ok
😂
bro jweezy that train and edited from the game is not like yours that you buy and take them..
Oh I see! it is not like my trains? is it used like a normal train that is included on the map?
my edited map almost finished hope you like it
I hear very few countries and states do use most of these Diesel locos on most of our lines for passenger duties as well as fright hauls but some of them are on hourly occasions are rarely ever seen but only on hourly passenger and freight runs and the majority of those locos doing the freight run duties are Diesel freight hauls since they are able to operate without the use of the pantographs Im just glad theres no Pantograph wires here in the present updates ore past mod update since i would imagine the giants engine and game physics would make those difficult to develop as well as the electric engine locomotive train models.
this photo and this map.one more this is small 😂
That is awesome that somebody has started adding some more locomotives and railcars from different countries!
bro I need to talk to you I already have the 3d of the CP2600 do you have an email or whatsapp
could you send it to me on discord maybe? I will add it to the pack when I can
the cp2600 is in obj file and inside it is in voxel version (like minicraft) can you convert this? and I have several British models if you want
I also have a wagon with a 3d model crane
can you send the link to your discord
Hmmm I will see what I can do with it.. I dont have a server myself, but my name on discord is NHLmetPENGUINS
https://discord.gg/pRZPMTfReQ
this is the discord server ive made for this mod!
that steam loco is that in the same store catagory? or do i have to wait for the update to come? since i cant find it in the store
The steam locomotive is included in the latest edition. If you are not seeing it, please make sure you have the latest versio
ive tried and so far it wont work
I will bring photos of the map that I edited in the editor to build champagne lines France, it was beautiful and magnificent with the new lines
Good evening, I hope you like it and that jweezy
approves of homemade trains 😂
Any plans in the future to make some old F units or high hoods?
the famous GP7 in original high hood form will be included in the next update! And you will be able to drive it SHF or LHF! Only a couple of skins for it atm, but I will add more shortly. F-Units, I have a model, just haven’t brought it in game quite yet but I will!
all sounds awesome I’ll keep refreshing until the update 😂 honestly ur mods are brilliant, you’re a legend if I knew how to do it I’d be offering to help
Thank you!
W mans your mods are amazing keep up the excellent work!
can you fix the gevo's and the d9's because they all are NS spec pls
No I dont think I will be making all of the small, insignificant changes that vary between the different roads. It was difficult to find models that I could make work for this mod in the first place, and in order for me to rework the model to correct it for every small detail that the roads do differently would be a large amount of time and in my opinion not anywhere close to worth it, as the models are not super detailed in the first place.
It took some time to figure out why the locomotives keep derailing sometimes, but not always...
Depending on how heavy the train is loaded, the locomotive keeps derailing. I see how the boggie lifts up while accelerating. Its not so bad as in some previous versions but still reducing the fun.
Anyway, great job and its helping a lot.
I hope one day someone may make european/german trains too
Are you using the GP38s and having those issues with the bogies lifting up when accelerating? If so, I have found that issue as well, and I have been working on improving that. I havent had those issues with the 6 axle locos
who else keeps refreshing hoping the update has dropped 😂
this weekend for sure! Going to be adding A TON of new locos, new railcars, updated railcar loads, a new warehouse, and so much more! Hope y’all enjoy it. Look for it either tonight, or hopefully by saturday
I wish more train objects like station clock or station lamps track signals signal box would be cool do really good work great respect
Yeah I was really hoping to have some other modders help by creating assets like you mention, but nobody has so far! I do have a few more signal options coming for the next updat
Wow Nice
Thank you!
Are you planning on adding steam locomotives?
I FINALLY figured out what my issue was with the first steam train I have been working on for a while! so it is FINALLY finished up, and will be included in the next update!
can’t wait for this “insert excited emoji here”
Yeah I hope y'all like it! haha
It's one of the preserved engines too Nickel plate #765. Though I imagine like the diesels the numbers can be changed
Yes it is loosely based off of NKP #765, the preserved Berkshire, But you are correct, you can change the numbers to whatever you want!
Could we possibly see a pere Marquette Berkshire in the future? Like #1225? Possibly maybe even the famous Polar Express for Christmas?
Yeah I think Pere Marquette will be close! and oh I like the idea of the polar express as well!
Are there any B&O locomotives in the update?
when do you think the next update will be ready?
Hoping to have it ready soon
simply amazing. Beautiful
how’s the steam locomotives coming
is there a way I can add my own reporting marks onto trains? like a prlx type thing
Yes you can create your own paint schemes! there are templates in the "textures" folder for most of the locomotives for you to create your own! just takes some work to add it to the mod
ALSO, I intend on including PRLX and other leaser locomotives in the near future haha
So we can essentially create private reskins if we wanted? That's pretty cool
Yes you can!
that really cool, is there a certain software you recommended to do it?
I use paint.net to create my paint schemes
and you can also edit the textures there and place them into the file?
how you mofify crane? what parameters?
thkan you
Good morning, you have to go to the crane's xml at the search center off mass, the value will be like 36000, change to 160000, don't change anything else, the crane will have 160 tons and with the weights of 10 tons of additional ones, various up to the weight of the locomotive, for example one 180 ton locomotive put the crane with 8 weights of 10 tons it will give you 80 tons plus its 160 tons lift the locomotive found out if you have difficulty let me know and I will send you the edited xml ok
Be careful, the crane is heavier and takes longer to stop, here I send the edited xml change 25000 to 160000 like the photos ok
I've honestly been having trouble downloading from here it keeps saying the the file isn't on the site
Hmmm it seems to be working just fine for me.. were you able to get it?
The version I got was on FS.Com which also contains a lot of PC only mods. Unfortunately they don't have the latest version at least not yet however it worked there. And to be honest if this WAS on the modhub it would work there too. Not sure why I can't get it from here without issues though it's a bit weird.
Just wondering and it might have been asked already. If so i'm sorry. Is there any plans on making any HI-Rail vehicles or Maintance-Of-Way equipment in the future?
No worries youre good! sorry for the late reply, I have been on my honeymoon!
As for hi-rail, yes I intend to add some at some point! I havent really found any good models yet, but when I do I will add them when I can!
Awesome! And Congrats on the marrage!
Thanks a bunch!
I know a member of a group that might be able to help u with such things as hi- rail a WMF group member by the name of Adam if not a few group members of that group and their patreon that have been testing the Hi Rail vehichles that might be useful in being the vehichles and models u seek mabey u might seek out WMF and the WMF patreon along with a Patreon containing the Hi Rail Mods in development and Testing and offer ur help in working with them to test their Hi Rail mods
LOL!!! I've got their HI-Rail stuff. It's crap! UNLESS you are going to just use them on straight track. Curves? Forget it. wont follow curves at all. I'll wait for a real modder (JWeezy) to make them.
I know people like Adam in Wood Medow Farms he and many have been Testing that Hi Rail Stuff in the Wood Medow Farms group Patreon since their Wood Medow Farms stuff is still under testing
u know hi rail vehichles were used for things like maintanence mind u so yea on such things like straight tracks that is possible to use on straight track but only for maintanence purposes
modified crane with weight to lift locomotives of 220 tons, precision of placing 4 weights of 10t on each side, total 80t lifts any locomotive and I no longer need to change the XML of the locomotives
The switch tracks keep switching back over and causing the train to derai
Good morning, it depends on the way you install it, the trigger part must always be installed on the side of the line you are building, not on the connection to join the end, for example, always connect before having a line in front, as happens when you have a line ready Go connect this adapter and delete a line, then there's always a bug, understand?
I sort of understand
Howdy, sorry for the delay I have been on my honeymoon. It sounds like you have the animated object extension mod that makes doors and gates open automatically? This mod will cause the issue you are describing, it is not compatible with my mods
Okay thanks that is probably it then. Again thank you
Youre welcome, hope that fixed the issue!
This autocrane now is a 75 tons
but now I use a Limberg auto crane I changed its xml to 60 tons and the weights to 7 tons each total 74 tons and lowered the locomotives to 40 tons
The escavator volvo is a mod fs miner and i edit xml locomotive put just 21 tons for volvo take
Is volvo fh16 edit by me
where can I download the Volvo fh16 because I like these trucks
https://fs22.com/farming-simulator-22-mods/trucks/volvo-f16-v1-0/
Hello where can you get the Volvo in the picture below
Hola excelente actualizacion felicitaciones nuevamennte tremendo trabajo,lo unico que note que si bien la grua que va en el almacen es dificil de colocar ,no es tan complicado hacerlo (yo lo hice sin sacar el techo x que no sabia varias veces)lo que si note si lo puedes arreglar es que despues de colocarla cuando la estas utilizando salta y se sale del carril eso pasa casi que continuamente lo que implicaque pases mucho tiempo colocando la grua nuevamente en su lugar,como siempre felicitaciones y gracias
If you're looking for models to add i would check out stuff from the Trainz Railroad simulator series. I'm pretty sure some of those models could be adapted to Farm Sim. I happen to know about quite a few models that would be suitable including ones you've been looking for Trainz Forge is a good website too look on for up #4014 and #844. They also have a couple of geared locomotives like a climax and shay. And under diesels Ive seen good F units.
Thank you! I have looked at a few trainz models, and I have been unsuccessful in importing them into blender and exporting them into GE.. Have you ever ingamed any of the models
Honestly I'm just as stumped as you are i dont even know how blender works to begin with but i would assume its what everyone uses these days. If I can figure out how to get it to work do you want me to share the models
I can provide you with the 3d of it provided by CP Portugal, the train 4700 and all the weight data etc if you want
Wow that is incredible! do you work for the railroad in Portugal? Could you DM me on facebook maybe and we could discuss more?
Also, I have not been able to figure out how to make a diamond interchange work (like the one in your picture) because of the way the locomotives and rolling stock roll along and inside of the rails.. As soon as I figure it out, I will be adding a diamond interchange!
Good morning, I don't work at CP Portugal but I have knowledge there, that's why they sent me the 3D of the train, yes, do you have WhatsApp? my number 912 254 886 thank you
ive been studying one of stations irl operates a Junction style track layout at the Northgate station were most of our trains run in and out.
I reconise one of our stations at northgate has a track layout similar to that were our trains run in and out called a Junction style if im not mistaken which is a kind of Spoke style Junction which is a combination of multiple junctions ofc that image u posted there shows a combination of multiple junctions
principalGood friend, would it be possible to create these lines and this grateful Portuguese freight train
could you add an EMD SD/GP 9 or a F9 ?
I am going to try to add an older SD9 or GP9 if I can find a model! Id like to add an F9 at some point if I can find a good model too
Is nobody having a texture problem on the locomotives?? some are blurry and others arents.
I haven't noticed anything of the sort
Howdy Jimmy, sorry for the delayed response as I have been sick. Blurry textures has been an issue throughout FS22, it is not specific to just my mods. I have heard that when somebody is experiencing these issues, clearing the shader cache can correct this issue, if you search how to clear shader cache on YT it should show you how. Please let me know if that fixes the issues for ya!
Thanks for the reply!